Massachusetts Lead Inspector/ Risk Assessor Practice Exam

These questions are part of the practice quiz. Start practicing

• What is the meaning of µg/ft² in the context of lead dust sampling?
• What must be done with pre-primed components?
• When must surfaces that were stripped or dipped be reinspected?
• What is prohibited for property owners under anti-discrimination clauses in Massachusetts lead laws?
• What is required if an A/M or F surface has failed encapsulation during a PCAD?
• What is required for family child care facilities regarding lead hazards?
• What does an X-ray fluorescence (XRF) analyzer measure?
• What is a necessary step prior to issuing a letter of deleading compliance after a reoccupancy inspection?
• How often should high-risk children aged 6-36 months be tested for lead exposure?
• Which components can typically be grouped together during an interior lead inspection?
• What is the maximum tax credit for deleading compliance per unit?
• What does it mean when occupants are described as "relocated"?
• For exterior surfaces, how much loose area can exceed the intact surface limit for moderate risk deleaders?
• Under MA lead law, what does sealing surfaces refer to?
• What condition is diagnosed as lead poisoning in a child under 6 years old?
• What does the term 'M/I' refer to when discussing parts of a window?
• What documents should be issued if a unit has no lead hazards after an initial inspection?
• What blood lead level is regarded as poisoning?
• Exterior porches are noted for which of the following features?
• Which of the following is considered a low risk deleading activity?
• What should be done with all dust when sampling for lead?
• What limitation applies to moderate risk deleading activities regarding paint removal?
• What is the maximum allowable amount of lead in dust samples for floors to pass?
• What is the first step in conducting a patch test?
• To be authorized for moderate risk deleading, what must an individual pass?
• How many dust wipe samples are required for high or moderate risk work?
• True or False: If dust samples collected during a reoccupancy inspection have passed, they do not need to be collected again for final compliance.
• Who is authorized to perform high risk deleading work?
• Which protective measure should a sampler employ while collecting paint chip samples?
• If no high or moderate risk deleading occurred, how many wipes are taken?
• After three sets of dust samples have failed, what must an owner do?
• What defines a surface as "intact"?
• What must be conducted to ensure interim control of lead hazards?
• If a door system is discovered that was missed during the initial inspection, what should be recorded?
• When is relocation required for an interior unit undergoing lead remediation?
• Which component is not authorized for encapsulation?
• What types of documents are given following an initial inspection that identifies lead hazards?
• What does REOC stand for in the context of lead inspection?
• What does full initial inspection compliance indicate about a property?
• In addition to ingestion, how can lead poisoning occur in children?
• What is the required occupancy status for the removal and replacement of a leaded window in an interior common area with multiple means of egress?
• What indicates a failed X-cut test?
• Lead can enter the body primarily through which pathways?
• True or False: It is not necessary to conduct a final lead inspection if previous samples passed.
• What is the occupancy status for scraping interior window sills?
• What areas need to be inspected or deleaded in non-residential child care centers?
• What is the occupancy status for making a wall intact in an interior common area with only one means of egress?
• What is the maximum allowable dust wipe level for window wells or exterior sills?
• What does a 'Granted' status on a PCAD No Docs Waiver indicate?
• Which of the following is NOT a responsibility of CLPPP?
• What are the two types of waiver forms mentioned?
• At what age should children in Massachusetts first be screened for lead poisoning?
• Who is required to take a 4-day DLS deleading course?
• What types of reinspections are commonly conducted?
• Can sodium sulfide be used on properties receiving federal assistance?
• What is NOT a purpose of a PCAD?
• What should a HEPA filter be capable of removing for it to be classified as such?
• What role does a licensed deleader play after multiple failed dust sample tests?
• True or False: Massachusetts requires dust samples to be taken from a 1 square foot area.
• How do adults primarily acquire lead poisoning?
• What characterization applies to a Mismatch Address Waiver?
• What is required by HUD for soil when lead levels exceed 5,000 ppm?
• What is considered a blank sample in dust sampling?
• True or False: Moveable impact surfaces must be deleaded in their entirety.
• Who can be classified as an owner's agent?
• What can lead to the denial of a certificate of reoccupancy?
• What document must inspectors send to CLPPP after a lead inspection performed following a lead determination where an order to correct was issued?
• What is a requirement for areas accessible to children in group child care facilities?
• Should halls and stairs be counted as part of the total rooms in an inspection report?
• What is the main difference between a true PCAD with and without hazards?
• How many patch tests must be conducted prior to encapsulating?
• What is considered a dangerous level of lead in glass, ceramic, or porcelain utensils?
• What does a property owner need to do if they have lead hazards highlighted during a sale?
• What is NOT considered a common area?
• If no hazards are found during an inspection, what is the next step?
• Which surfaces are classified as movable impact surfaces?
• In which areas should deleading and inspection occur in housing complexes?
• What is the definition of a dangerous level of lead in paint?
• What is one of the requirements before performing a PCAD?
• True or False: Dust samples do not need to be taken inside if deleading work was performed only outside the unit.
• In a low risk work unit, how many dust samples are needed from each common area egress?
• Which of the following items is included in low risk replacement?
• What is included in the types of waivers related to lead inspections?
• What does the unit µg/dl measure in relation to lead exposure?
• What must the dust samples for window wells be less than to pass?
• What is the main goal of renovation as opposed to deleading?
• Where should the unit number and address be noted in the inspection report?
• How many x-cut tape tests must be performed before encapsulation?
• During a PCAD, how many samples are needed if high-risk work was done?
• What is one of the two situations where a compliance letter can be issued without taking dust samples?
• What is Mel's rule regarding homes that come into full deleading compliance?
• What does sodium sulfide indicate in lead inspection?
• What are the distinguishing features of an interior porch according to inspection criteria?
• After signing the PCAD No Docs Waiver, which of the following should not be expected?
• What is typically required in addition to the lead inspection report if lead hazards are found?
• What is the acceptable dust wipe level for floors in lead inspection?
• Which of the following methods is NOT included in low risk deleading activities?
• What does compliance mean in the context of lead safety in Massachusetts?
• Who is permitted to perform risk assessments?
• What is typically considered the last deleading activity?
• What must happen if an owner fails to achieve property compliance by the end of the safe harbor period?
• Which of the following is NOT considered an approved covering for lead abatement?
• Under strict liability, who is responsible if a child gets poisoned from lead hazards?
• Which of the following statements is true regarding notice for deleading at vacant units?
• When should you calibrate your XRF?
• What is a Chain of Custody in lead inspections?
• What is a requirement for buildings converted from commercial to residential status?
• Which is an example of a movable impact surface?
• What should be considered during the X-cut test's execution?
• True or False: Notification prior to deleading is always required for owner/agents performing low-risk work.
• What must high risk deleading activities include?
• What unit corresponds to Mg/cm², often used in XRF readings?
• What is the most common sign of unauthorized deleading?
• What is the consequence of substantiated unauthorized deleading?
• For moderate risk replacement, which of the following practices must be followed?
• When using XRF and sodium sulfide tests, what should never be concluded if results conflict?
• Where should dust samples be taken after a renovation project?
• What are the three levels of occupancy restrictions during lead inspections?
• How many total samples are generally required in a low risk work area?
• What is the appropriate cleanup method for low risk situations?
• Which component is NOT typically included in the window assembly?
• What happens if compliance is not achieved within the required maintenance period after a PCAD?
• How long do inspectors typically have to issue compliance documents?
• What is the primary purpose of the PCAD No Docs Waiver?
• Which of the following is considered a "one and done" sign of unauthorized deleading?
• If a lead inspector identifies lead hazards during a Post Compliance Assessment Determination (PCAD) and hazards are corrected after 30 days, what is issued?
• What is required before a reoccupancy inspection can be passed?
• What is the main purpose of conducting a visual inspection after a renovation?
• What education requirement must owners and agents meet for lead work?
• Which condition is NOT necessary for a project to be considered deleading?
• During reinspection, what must be ensured about the sashes once they have been replaced?
• What distinguishes lead determinations from lead inspections?
• What does CLPPP stand for in relation to lead safety?
• Which of the following surfaces is typically excluded from friction surface regulations?
• What is required from a seller of a pre-1978 property regarding lead hazards?
• What action is required for accessible surfaces involved in lead hazard removal?
• Which material can sodium sulfide NOT be used on?
• What additional action is required for dust wipe sampling in the case of high or moderate risk work?
• What is an encapsulant?
• Why is it important to wait two hours before cleaning up after lead work?
• Which exterior components can be grouped together for lead assessment?
• Which of the following best describes a 'surface' in lead inspections?
• What starts the 30-day maintenance rule in regard to the PCAD No Docs Waiver?
• True or False: Hazards identified during a PCAD can only be corrected by licensed contractors.
• What is the blood lead level that is considered a concern?
• According to the CLPPP definition, who is considered an owner?
• Which of the following does NOT fall under the methods for deleading?
• When can a certificate of reoccupancy be issued?
• How many dust wipes are necessary to issue a letter of full initial inspection compliance?
• What is a 'Denied' result for a PCAD No Docs Waiver considered?
• What is the potential compliance status for a property built before 1978 with a child under 6 residing in it?
• What triggers a compliance evaluation according to the "three strike" rule?
• What are the three types of PCADs?
• What defines soil lead hazards according to HUD/EPA standards?
• What type of damages should be considered structural defects related to lead hazards?
• Which feature commonly characterizes an interior porch as per inspection standards?
• What is the purpose of structural repairs related to lead hazards?
• Which surfaces can be encapsulated according to lead safety protocols?
• What is unauthorized deleading?
• Which age group is at the highest risk for lead poisoning?
• What is the allowable lead level in paint chips to be classified as dangerous?
• What is one of the functions of the parting bead in a window?
• True or False: Private inspectors are allowed to inspect homes where children have lead poisoning.
• What concentration of lead in paint indicates dangerous levels according to regulations?
• Who needs to be notified regarding deleading activities?
• True or False: Low risk work can include making intact any amount of loose paint.
• Which of the following best describes a common area in a multi-unit residential property?
• What is the required advance notice for deleading work?
• What is the required training duration for high risk deleading workers?
• What type of surfaces must be documented for each in a compliance verification process?
• What kind of license is required for contractors performing deleading work?
• What does the Grandfather Compliance Provision allow?
• How long is the Letter of Interim Control valid?
• In lead inspections, what does PCAD stand for?
• Which components make up a serial number for a lead inspection?
• What is the occupancy status for spraying encapsulant on an interior windowsill?
• What happens if more than 1/2 inch of encapsulant is pulled off during the patch test?
• What is a necessary follow-up care method for children with a blood lead level of 5 μg/dl or higher?
• What is a recommended tool for scraping paint chip samples?
• Which of the following must landlords provide to tenants regarding lead hazards?
• What is a characteristic of a True PCAD?
• What must be included to verify grandfathered compliance?
• Under what condition does the blind stop not exist?
• When is encapsulation ruled out for a room?
• The requirement for patch tests is to ensure what?
• What components does VR refer to in a fully contained vinyl window?
• What is the minimum waiting period before low and high-risk workers can clean up after lead work?
• What is the Environmental Protection Agency's (EPA) action level for lead in drinking water?
• What type of inspection is required before performing any deleading work?
• What is the focus of lead inspection regulations in residential properties?
• Who is responsible for recleaning if the first set of dust wipe samples fails?
• What type of work can high risk workers perform related to interior structures?
• What is the typical appearance of sodium sulfide before it reacts with lead?
• What are accessible mouthable surfaces in a residential setting?
• Which scenario is exempt from site-specific lot line waivers?
• What types of inspections require dust samples to be collected?
• Who is authorized to delead urgent lead hazards?
• If dust wipes fail, who is responsible for recleaning the unit and common areas?
• What course duration is required for moderate risk deleading?
• After measuring the length and width of a loose paint spot, what is the final step to determine the area?
• Who can perform moderate risk deleading activities besides authorized owners and agents?
• What is the purpose of the X-cut test?
• What qualifies as "residential premises" or "property" according to lead regulations?
• Which inspection type is indicated to require dust samples for compliance?
• What should be done with the blind stop if a vinyl window is replaced?
• What is an essential component of the HEPA sandwich method?
• What type of inspection is necessary before conducting dust sampling?
• Which of the following is NOT considered a part of a window?
• When are deleading invoices required?
• What is the important focus during a reoccupancy reinspection?
• Which of the following describes an exception for the intact standard on metal surfaces?
• What is necessary to verify for passing dust samples during reinspections?
• What is the most common way for children to get lead poisoning?
• What does the term "loose lead paint" signify?
• Which document is NOT required in a true PCAD report without hazards?
• What is a surface that is 0.5% or more lead by dry weight categorized as?
• What is considered a passing result for a patch test?
• If you test peeling painted paneling and receive a reading of 0.5 mg/cm², what should you do next?
• True or False: Residential obligations under the MA lead law do not change when a commercial building is reclassified.
• To pass, what is the maximum allowable amount of lead in dust samples for window sills?
• Are door jambs considered an F hazard on the side the door does not open?
• Structural defects contributing to lead hazards may include which of the following?
• What is required after any relocation during a lead inspection?
• Which best describes the term "demarcation lines" in lead management?
• What is the recommended screening frequency for high-risk children at age 4?
• What is the first step in measuring a loose paint spot?
• Which document is necessary for issuing a letter of unauthorized deleading?
• Should north, south, east, and west be written out in their entirety when filling out address information?
• Which method is part of the HEPA sandwich technique for moderate/high risk cleanup?
• Which of the following describes the purpose of interim controls?
• What is the function of identifying urgent lead hazards during a risk assessment?
• What signifies a dangerous level of lead on surfaces with sodium sulfide solution?
• What constitutes an urgent lead hazard?
• Which of the following is not a noted location for taking dust samples?
• What should you ask yourself when taking dust samples?
• Which group is NOT considered at high risk for lead poisoning?
• What is the appropriate method for finding an address in the CLPPP database?
• When is a Certificate of Maintained Compliance issued?
• Which component is NOT a part of intact surfaces?
• What type of compliance involves addressing urgent lead hazards?
• True or False: A reoccupancy inspection can be successful if doors are not put back on.
• What does the X-cut tape test primarily assess?
• True or False: A storm frame must be removed to avoid failing the reinspection.
• Which surfaces are no longer considered M/I on a fully contained window?
• What is indicated by VR in the context of a lead inspection for a fully contained vinyl window?
• If a vinyl replacement window (VR) does not have a storm window frame, how should the surfaces be treated?
• Occupants are relocated until which of the following occurs?
• What primarily needs to be identified during an RRP assessment?
• What is the occupancy status when making exterior leaded siding intact?
• What is the required size for paint chip samples when collecting them for lead testing?
• What should you do if dust wipes fail during a lead inspection?
• What action should be taken if a child lives in a home undergoing renovations?
• How many days does a property buyer have after signing a purchasing agreement to have a lead inspection performed?
• If more than 30 days have passed since a reoccupancy inspection, what must be done?
• What is the required training for owners and agents seeking to perform low risk deleading activities?
• What is NOT an element to be found on the PCAD hazards page?
• What are structural defects in the context of lead hazard assessment?
• What kind of test is used to determine lead poisoning in children?
• Where on the inspection report can N/A be recorded?
• Which of the following describes the parts of a door system?
• Which of the following is NOT part of the sampling process in a unit with high or moderate risk?
• What must happen to occupants of a unit where moderate or high risk interior deleading is occurring?
• What document is included in a true PCAD report with hazards?
• How many initial inspections can a unit have for lead assessment?
• Children are considered "high-risk" if they...
• Which type of labs must analyze dust samples according to lead inspection regulations?
• What are the five address components verified by USPS?
• What is the first step in inspecting the M/I parts of a window during a reinspection?
• Which type of dwelling does not require inspections for lead compliance if there is no child under 6 living there?
• What surfaces are most often involved in paint removal?
• If a moderate risk deleader encounters loose paint, what is the maximum area for intact surfaces indoors?
• What does the Letter of Lead Paint Reoccupancy Reinspection Certification indicate?
• When should dust samples be taken from a unit with high or moderate risk work?
• What determines if a painted surface is eligible for encapsulation during testing?
• How does a compliance evaluation get triggered according to the "one and done" signs?
• Which of the following is NOT a method by which kids can get lead poisoning?
• Loose leaded floors must be?
• When defining a work area for deleading activities, which of the following is true?
• For which type of child care facility must compliance with lead law be maintained?
• Who must receive the tenant lead law notification and tenant certification form?
• What is the main purpose of a PCAD No Docs Waiver?
• What is the maximum area of abatement in a room that is considered moderate risk?
• True or False: All masonry surfaces have an intact standard.
• What is the required number of dust wipes to be collected for renovation work in a pre-1978 home?
• What may be defined as a HEPA filter vacuum cleaner?
• During an initial lead inspection, how many dust samples are typically required?
• What is a dangerous level of lead measured by an XRF gun?
• How are deeded areas defined in rowhouses and townhouses for inspection?
• How long must an inspector wait to take dust samples after cleanup has occurred?
• How frequently is a leak test required to be performed on an XRF?
• During a PCAD, which of the following is NOT a focus of inspection?
• True or False: The presence of dust wipes failing indicates that additional cleaning may be necessary regardless of the overall cleanup.
• How many dust wipes should be taken during a PCAD if no deleading work was performed?
• Where are the results of x-cut tape and patch tests recorded?
• At what blood lead level (BLL) is a child considered at risk for lead poisoning?
• What is a requirement if hazards are identified during a PCAD?
• What does the term "loose" refer to in the context of paints and coatings?
• What is one of the types of compliance regarding lead safety?
• What document must be provided to the prospective buyer before signing the purchase and sale agreement?
• In how many instances can a compliance letter be issued without dust samples?
• Who is responsible for granting authorization for deleading activities?
• True or False: Different authorized individuals can work on the same work site simultaneously while performing their highest level of deleading.
• Which methodology should be used when conducting an inspection?
• What should be the state of surfaces during the Chemical Removal Visual Inspection?
• What is the lead dust level considered acceptable for interior sills during testing?
• What does a failed patch test result indicate?
• How is a "loose" surface identified?
• What must be done to comply with the lead law after a commercial building becomes residential?
• Which of the following waivers requires surface treatments to be sealed?
• What is the standard regarding metal surfaces related to lead compliance?
• What type of lead hazard involves lead paint that is highly deteriorated and poses immediate risk?